Connecting wood to concrete is one of those tasks that sometimes come up during rebuilding projects. For instance, if you are building a divider wall in the cellar or in a house with a section on-grade establishment, you should connect wood sole plates to fill in as the base for the divider studs. Expert carpenters occasionally utilize a powder-incited nailer for this. A tool that fires specific Nails through the wood and into the concrete, utilizing 22-type explosive gunpowder. Assuming you expect to be doing cement nailing, you might need to consider allocating resources to a powder-incited nailer.

If you have a couple of nails to drive, driving them with a hammer is significantly low-cost. There are exceptional solidified nails to use for this application, which are absolutely not the same as the nails utilized with a powder-actuated nailer. High-carbon solidified steel is used to manufacture concrete nails, featuring fluted shafts that enable them to sink into the concrete for support. Masonry nails, on the other hand, possess a square cross-section and taper from the head to the tip, providing an alternative option. Masonry nail is less expensive than substantial nails and is less inclined to break or twist. Explore our HIGH-SPEED WIRE NAIL MAKING MACHINE

Before You Begin

When hammering concrete nail or masonry nail. It’s ideal to utilize a framing hammer, which is higher and more substantial than a standard claw hammer. With its additional weight and milled face, a framing hammer creates the task simpler. Indeed, even with this heavier hammer, you should drill pilot holes for the nail. This is best done with a hammer drill and a masonry bit that is a similar breadth or marginally smaller than the nails you’re utilizing. Read about Nail gun

When nailing lumber to concrete, try to utilize pressure-treated wood. Standard lumber can decay because of dampness that wicks through the concrete over time.

Safety Considerations

A lot of DIYers fail to utilize hearing protection and eye defenders when utilizing hand apparatuses, feeling that main power devices warrant this level of alert. Yet, any time you are utilizing a hammer or other impact instrument, it’s a smart thought to utilize essential well-being hardware. A hammer can simply break a nail—particularly the brittle, solidified steel of a concrete or masonry nail—and send it flying through the air. There are likewise occurrences where the essence of a hammer can chip and send a broken ceramic flying. The sound made when beating nails can likewise harm hearing over time, so don’t disregard hearing defenders for all periods of the work—not exactly when penetrating pilot holes.

Try to wear a particle mask when penetrating concrete, as concrete residue can be harming the lungs.

 

Read more: GALVANIZED NAILS

Please visit our official Facebook Page for updates from us.

For more details about our products, you can Contact Us.