Wire Drawing Machine GWP 400
Our Wire Drawing Machines have a Main Body with a base, a drawing drum and a drawing die box of close grain Cast Iron. A Water Cooling arrangement is provided inside the Drawing Drum and the Die Box. Phosphorous bronze gears with high carbon axle steel worms are provided. This machine is suitable for drawing Wires from 8mm or 6mm to 2 mm. It is suitable to draw wires used to make Barbed Wire, Wire Mesh, Nails, etc.
Technical Specifications
Type | OTO Type Wire DrawingMachine |
---|---|
No. of Blocks | 4 |
Block dia | 400mm |
Material to be drawn | M.S Wire |
Inlet Wire size | 2.65mm |
Finished Wire Size | 1.65mm |
Speed | 188 mtrs/ Min. |
A.R./ draft | 25% |
Capstan (a) Construction | Graded cast iron precision machined drawing surface Metalized and ground |
Die box | Adjustable for proper cast and helix. |
Gear box | Fabricated from mild steel and precision machined |
Gear | Worm reduction type |
Gaurd | Provided |
Bearing | Heavyduty, ball andtaperrollerbearin f stanctard make |
lubrication | Splash Lubrication |
Production capacity | 3000kgs/ 1 shift 12 hours ( working basis for 1.65mm wire dia at 75 % efficiency |
Electrical motor | 15/2, 7.5/2, 1440 RPM, Sq. cage introduction type, 3 phase , 415 volts , 50 T1/z., supply electric motor |